ㆍDetailed Description

• HOME > Product > Diecutter for corrugated board Semi Automatic > WTNS-SS1700

Descriptions＼Model WTNS-SS1300 WTNS-SS1500 WTNS-SS1700 WTNS-SS1900 WTNS-SS2100 WTNS-SS2500 Max.Sheet Size 1,000×1,300mm 1,100×1,500mm 1,200×1,700mm 1,300×1,900mm 1,500×2,100mm 1,700×2,500mm Min.Sheet Size 500×650mm 550×750mm 600×850mm 650×950mm 750×1,050mm 850×1,250mm Max.Cutting Size 970×1,270mm 1,070×1,470mm 1,170×1,670mm 1,270×1,870mm 1,470×2,070mm 1,670×2,470mm Operation Pressure 300Tons 350Tons 400Tons 450Tons 500Tons 550Tons Max.Speed 3,900S/H 3,800S/H 3,600S/H 2,700S/H 2,100S/H 1,800S/H Sheet Thickness 1-10mm, Corrugated Board B, A, AB, E-Flute Electrical power 11kw 14kw 18kw 24kw 27kw 35kw • Feeding unit - Supplementary device to help efficient feeding work. - Enable to smoothly feed even the sheet in heavily twisted and warped condition by adapting the spike transfer system with good workability. - Increase the workability by installing a camera on the stripping part of the delivery and stripping unit and installing a monitor on the feed unit. • Diecutting unit - Improve the flatness of the moving table in cutting to perform easy leveling(taping) work, accordingly assuring good product quality. - The system employs the hard chase and cutting plate that enhances mechanical durability. - The system is equipped with chase-arm to ease insertion and separation. • Stripping unit - The system is equipped with a full stripping system that increase accuracy, versatility and efficiency. - Possibly incease the work efficiency up to four times better than manual work. - Pin-type stripping device that can be combined with current method applying the existing upper/lower dieboard. • Delivery unit - Comfortable device for workers. - Supplementary device for automatic load of sheet, arrangement, automatic drop, tape insertion, etc. - With an auto conveyer, this unit can output in the specific number of sheet. - Stripping device of gripper margin that can be mounted on the WTNS type. • Double Stripping System - It`s possible for removal the leading part of sheet completely. - It`s no necessary to use the hammer or other tools in order to remove the leading part of sheet. • Touch Screen Monitor - When a failure occurs in the devices, this monitor will display both the failure and actions to be taken on the screen. - Install the monitor in an appropriate place, considering the moving range of workers. - Attach a camera, a monitor and a touch screen to provide an easy view on work circumstances of the devlivery unit and the stripping unit.(Optional item)